[general] # Path to a Public key to install on servers. If a usable key has not # been installed on the remote servers the user will be prompted for a # password and this key will be installed so the password will not be # required again CONFIG_SSH_KEY= # Set to 'y' if you would like Packstack to install MySQL CONFIG_MYSQL_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Image # Service (Glance) CONFIG_GLANCE_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Block # Storage (Cinder) CONFIG_CINDER_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Compute # (Nova) CONFIG_NOVA_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack # Networking (Neutron) CONFIG_NEUTRON_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack # Dashboard (Horizon) CONFIG_HORIZON_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Object # Storage (Swift) CONFIG_SWIFT_INSTALL=n # Set to 'y' if you would like Packstack to install OpenStack # Metering (Ceilometer) CONFIG_CEILOMETER_INSTALL=y # Set to 'y' if you would like Packstack to install Heat CONFIG_HEAT_INSTALL=y # Set to 'y' if you would like Packstack to install the OpenStack # Client packages. An admin "rc" file will also be installed CONFIG_CLIENT_INSTALL=y # Comma separated list of NTP servers. Leave plain if Packstack # should not install ntpd on instances. CONFIG_NTP_SERVERS=0.au.pool.ntp.org,1.au.pool.ntp.org,2.au.pool.ntp.org,3.au.pool.ntp.org # Set to 'y' if you would like Packstack to install Nagios to monitor # openstack hosts CONFIG_NAGIOS_INSTALL=n # Comma separated list of servers to be excluded from installation in # case you are running Packstack the second time with the same answer # file and don't want Packstack to touch these servers. Leave plain if # you don't need to exclude any server. EXCLUDE_SERVERS= # The IP address of the server on which to install MySQL CONFIG_MYSQL_HOST=172.16.0.11 # Username for the MySQL admin user CONFIG_MYSQL_USER=root # Password for the MySQL admin user CONFIG_MYSQL_PW=1279e9bb292c48e5 # The IP address of the server on which to install the QPID service CONFIG_QPID_HOST=172.16.0.11 # The IP address of the server on which to install Keystone CONFIG_KEYSTONE_HOST=172.16.0.11 # The password to use for the Keystone to access DB CONFIG_KEYSTONE_DB_PW=6cde8da7a3ca4bc0 # The token to use for the Keystone service api CONFIG_KEYSTONE_ADMIN_TOKEN=c9a7f68c19e448b48c9f520df5771851 # The password to use for the Keystone admin user CONFIG_KEYSTONE_ADMIN_PW=6fa29c9cb0264385 # The password to use for the Keystone demo user CONFIG_KEYSTONE_DEMO_PW=6dc04587dd234ac9 # Kestone token format. Use either UUID or PKI CONFIG_KEYSTONE_TOKEN_FORMAT=PKI # The IP address of the server on which to install Glance CONFIG_GLANCE_HOST=172.16.0.11 # The password to use for the Glance to access DB CONFIG_GLANCE_DB_PW=1c135a665b70481d # The password to use for the Glance to authenticate with Keystone CONFIG_GLANCE_KS_PW=9c32f5a3bfb54966 # The IP address of the server on which to install Cinder CONFIG_CINDER_HOST=172.16.0.11 # The password to use for the Cinder to access DB CONFIG_CINDER_DB_PW=d9e997c7f6ec4f3b # The password to use for the Cinder to authenticate with Keystone CONFIG_CINDER_KS_PW=ae0e15732c104989 # The Cinder backend to use, valid options are: lvm, gluster, nfs CONFIG_CINDER_BACKEND=gluster # Create Cinder's volumes group. This should only be done for testing # on a proof-of-concept installation of Cinder. This will create a # file-backed volume group and is not suitable for production usage. CONFIG_CINDER_VOLUMES_CREATE=y # Cinder's volumes group size. Note that actual volume size will be # extended with 3% more space for VG metadata. CONFIG_CINDER_VOLUMES_SIZE=20G # A single or comma separated list of gluster volume shares to mount, # eg: ip-address:/vol-name CONFIG_CINDER_GLUSTER_MOUNTS=172.16.0.5:/CINDER # A single or comma seprated list of NFS exports to mount, eg: ip- # address:/export-name CONFIG_CINDER_NFS_MOUNTS= # The IP address of the server on which to install the Nova API # service CONFIG_NOVA_API_HOST=172.16.0.11 # The IP address of the server on which to install the Nova Cert # service CONFIG_NOVA_CERT_HOST=172.16.0.11 # The IP address of the server on which to install the Nova VNC proxy CONFIG_NOVA_VNCPROXY_HOST=192.168.0.11 # A comma separated list of IP addresses on which to install the Nova # Compute services CONFIG_NOVA_COMPUTE_HOSTS=172.16.0.11,172.16.0.12 # The IP address of the server on which to install the Nova Conductor # service CONFIG_NOVA_CONDUCTOR_HOST=172.16.0.11 # The password to use for the Nova to access DB CONFIG_NOVA_DB_PW=34bf4442200c4c93 # The password to use for the Nova to authenticate with Keystone CONFIG_NOVA_KS_PW=beaf384bc2b941ca # The IP address of the server on which to install the Nova Scheduler # service CONFIG_NOVA_SCHED_HOST=172.16.0.11 # The overcommitment ratio for virtual to physical CPUs. Set to 1.0 # to disable CPU overcommitment CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=32.0 # The overcommitment ratio for virtual to physical RAM. Set to 1.0 to # disable RAM overcommitment CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=3.0 # Private interface for Flat DHCP on the Nova compute servers CONFIG_NOVA_COMPUTE_PRIVIF=eth1 # The list of IP addresses of the server on which to install the Nova # Network service CONFIG_NOVA_NETWORK_HOSTS=172.16.0.11 # Nova network manager CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager # Public interface on the Nova network server CONFIG_NOVA_NETWORK_PUBIF=eth0 # Private interface for network manager on the Nova network server CONFIG_NOVA_NETWORK_PRIVIF=eth1 # IP Range for network manager CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22 # IP Range for Floating IP's CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22 # Name of the default floating pool to which the specified floating # ranges are added to CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova # Automatically assign a floating IP to new instances CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n # First VLAN for private networks CONFIG_NOVA_NETWORK_VLAN_START=100 # Number of networks to support CONFIG_NOVA_NETWORK_NUMBER=1 # Number of addresses in each private subnet CONFIG_NOVA_NETWORK_SIZE=255 # The IP addresses of the server on which to install the Neutron # server CONFIG_NEUTRON_SERVER_HOST=172.16.0.11 # The password to use for Neutron to authenticate with Keystone CONFIG_NEUTRON_KS_PW=53d71f31745b431e # The password to use for Neutron to access DB CONFIG_NEUTRON_DB_PW=ab7d7088075b4727 # A comma separated list of IP addresses on which to install Neutron # L3 agent CONFIG_NEUTRON_L3_HOSTS=172.16.0.11 # The name of the bridge that the Neutron L3 agent will use for # external traffic, or 'provider' if using provider networks CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex # A comma separated list of IP addresses on which to install Neutron # DHCP agent CONFIG_NEUTRON_DHCP_HOSTS=172.16.0.11 # The name of the L2 plugin to be used with Neutron CONFIG_NEUTRON_L2_PLUGIN=openvswitch # A comma separated list of IP addresses on which to install Neutron # metadata agent CONFIG_NEUTRON_METADATA_HOSTS=172.16.0.11 # A comma separated list of IP addresses on which to install Neutron # metadata agent CONFIG_NEUTRON_METADATA_PW=d7ae6de0e6ef4d5e # The type of network to allocate for tenant networks CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local # A comma separated list of VLAN ranges for the Neutron linuxbridge # plugin CONFIG_NEUTRON_LB_VLAN_RANGES= # A comma separated list of interface mappings for the Neutron # linuxbridge plugin CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS= # Type of network to allocate for tenant networks CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=vlan # A comma separated list of VLAN ranges for the Neutron openvswitch # plugin CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet1:10:20 # A comma separated list of bridge mappings for the Neutron # openvswitch plugin CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-eth1 # A comma separated list of colon-separated OVS bridge:interface # pairs. The interface will be added to the associated bridge. CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-eth1:eth1 # A comma separated list of tunnel ranges for the Neutron openvswitch # plugin CONFIG_NEUTRON_OVS_TUNNEL_RANGES= # Override the IP used for GRE tunnels on this hypervisor to the IP # found on the specified interface (defaults to the HOST IP) CONFIG_NEUTRON_OVS_TUNNEL_IF= # The IP address of the server on which to install the OpenStack # client packages. An admin "rc" file will also be installed CONFIG_OSCLIENT_HOST=172.16.0.11 # The IP address of the server on which to install Horizon CONFIG_HORIZON_HOST=172.16.0.11 # To set up Horizon communication over https set this to "y" CONFIG_HORIZON_SSL=y # PEM encoded certificate to be used for ssl on the https server, # leave blank if one should be generated, this certificate should not # require a passphrase CONFIG_SSL_CERT= # Keyfile corresponding to the certificate if one was entered CONFIG_SSL_KEY= # The IP address on which to install the Swift proxy service # (currently only single proxy is supported) CONFIG_SWIFT_PROXY_HOSTS=172.16.0.11 # The password to use for the Swift to authenticate with Keystone CONFIG_SWIFT_KS_PW=311d3891e9e140b9 # A comma separated list of IP addresses on which to install the # Swift Storage services, each entry should take the format # [/dev], for example 127.0.0.1/vdb will install /dev/vdb # on 127.0.0.1 as a swift storage device(packstack does not create the # filesystem, you must do this first), if /dev is omitted Packstack # will create a loopback device for a test setup CONFIG_SWIFT_STORAGE_HOSTS=172.16.0.11 # Number of swift storage zones, this number MUST be no bigger than # the number of storage devices configured CONFIG_SWIFT_STORAGE_ZONES=1 # Number of swift storage replicas, this number MUST be no bigger # than the number of storage zones configured CONFIG_SWIFT_STORAGE_REPLICAS=1 # FileSystem type for storage nodes CONFIG_SWIFT_STORAGE_FSTYPE=ext4 # Whether to provision for demo usage and testing CONFIG_PROVISION_DEMO=n # The CIDR network address for the floating IP subnet CONFIG_PROVISION_DEMO_FLOATRANGE=172.24.4.224/28 # Whether to configure tempest for testing CONFIG_PROVISION_TEMPEST=n # The uri of the tempest git repository to use CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git # The revision of the tempest git repository to use CONFIG_PROVISION_TEMPEST_REPO_REVISION=master # Whether to configure the ovs external bridge in an all-in-one # deployment CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n # The IP address of the server on which to install Heat service CONFIG_HEAT_HOST=172.16.0.11 # The password used by Heat user to authenticate against MySQL CONFIG_HEAT_DB_PW=0f593f0e8ac94b20 # The password to use for the Heat to authenticate with Keystone CONFIG_HEAT_KS_PW=22a4dee89e0e490b # Set to 'y' if you would like Packstack to install Heat CloudWatch # API CONFIG_HEAT_CLOUDWATCH_INSTALL=n # Set to 'y' if you would like Packstack to install Heat # CloudFormation API CONFIG_HEAT_CFN_INSTALL=n # The IP address of the server on which to install Heat CloudWatch # API service CONFIG_HEAT_CLOUDWATCH_HOST=172.16.0.11 # The IP address of the server on which to install Heat # CloudFormation API service CONFIG_HEAT_CFN_HOST=172.16.0.11 # The IP address of the server on which to install Ceilometer CONFIG_CEILOMETER_HOST=172.16.0.11 # Secret key for signing metering messages. CONFIG_CEILOMETER_SECRET=70ca460aa5354ef8 # The password to use for Ceilometer to authenticate with Keystone CONFIG_CEILOMETER_KS_PW=72858e26b4cd40c2 # To subscribe each server to EPEL enter "y" CONFIG_USE_EPEL=y # A comma separated list of URLs to any additional yum repositories # to install CONFIG_REPO= # The IP address of the server on which to install the Nagios server CONFIG_NAGIOS_HOST=172.16.0.11 # The password of the nagiosadmin user on the Nagios server CONFIG_NAGIOS_PW=c3832621eebd4d48